Equipment collateral verification and field inspections.

An equipment collateral verification confirms, unit by unit, that the equipment on a borrower's schedule exists, is the unit described, sits where the file says it sits, and is in the condition the credit assumed. Lukes & Lukes does the count on site, matches every data plate and serial number, and reports each exception in writing.

USPAP-Compliant CMEA Certified Plate & Serial Matched Nationwide

At a glance

What it is
An on-site count of pledged equipment against the borrower's schedule, with each unit identified by its data plate and serial number.
What it confirms
Existence, identity, location and condition of each unit, and every difference from the schedule.
Who orders it
Commercial, asset-based and equipment-finance lenders, workout officers, floor-plan lenders to equipment dealers, acquisition lenders and insurers.
The record
A reconciled schedule, an exception list, and a dated, geotagged photograph of every plate and every unit.
With or without a value
A verification alone carries no opinion of value. Add an OLV, FLV or FMV and the same visit becomes a USPAP-compliant appraisal.
Where it stops
We report what is and is not on site. Where a missing unit went is a question for counsel.

What it confirms

What does an equipment collateral verification confirm?

A verification answers five questions for every line on the schedule: is the unit there, is it the unit described, where is it, what condition is it in, and is anything on site that the schedule leaves out. Identity comes from the data plate and the serial number, read on the machine and photographed, not from a decal or the borrower's word.

Documentation tells a lender what a borrower says it owns. The Secured Finance Network's 2026 fraud task force, written after a run of double-pledged and missing collateral cases, told lenders to require physical verification on inventory-heavy deals and to track serial numbers over time. A verification is that physical check for equipment.

Collateral appraisals for lenders →

  • Existence: each scheduled unit seen and photographed on site
  • Identity: make, model, data plate and serial number matched to the schedule
  • Location: site, building and position, with GPS on every photograph
  • Condition: operating status, hours or mileage, visible damage, parts removed
  • Exceptions: missing, substituted, mismatched and unscheduled units listed one by one

Field exam or verification

Is an equipment verification the same as a field exam?

No. An asset-based lending field exam tests the books: receivables aging, payables, the borrowing base certificate and the controls behind them. It rarely puts a person in front of each machine. An equipment verification is the physical side. It counts the equipment, reads the plates and reconciles them to the fixed-asset schedule. Lenders order the two together on equipment-heavy credits, and the verification report is written to sit beside the field examiner's.

Large sites

How do you count equipment across a large yard or plant?

A large site is split into zones before the count starts, and each zone is closed before the next opens. Every unit gets a photograph of the whole machine and a close photograph of its plate. Each photograph carries its time and GPS position. Plate text is read into the working schedule by optical character recognition and checked by the appraiser line by line.

Bulk material, racked stock and rows of like units are counted by computer vision from overlapping photographs, and a sample of each count is checked by hand. Where an aerial survey is the right tool, it is flown by an FAA-certificated remote pilot with the consent of the site owner or occupant, or under a court order. The count is reconciled to the schedule on site, so exceptions are run down while the team is still there.

We have run large inventories on difficult sites as specialists retained by another appraisal firm.

Exceptions

What happens when a unit on the schedule is not there?

It goes on the exception list with the last description the schedule gives, the areas searched, and what the site contact said about it, in their words and with the time. A plate that does not match its schedule line is photographed and recorded beside the line it was supposed to match. The report states the facts and stops. Where the unit went, and who moved it, is a question for the lender's counsel.

What you get

What does a collateral verification report include?

  • The schedule reconciled line by line: verified, exception or unscheduled
  • An exception list with the evidence for each item
  • A photograph of every unit and every data plate, timed and geotagged
  • Condition and operating notes per unit
  • The original photo files, kept unaltered with their metadata
  • An opinion of value on the same visit, when the lender orders one

Related situations

When do lenders order a verification?

At origination on an equipment-heavy credit, at each annual review, when a covenant trips or a payment slips, before a forbearance or amendment, and when a workout moves toward liquidation or a court.

Common questions

Answers, up front.

Who can I hire to confirm that pledged equipment actually exists?

An independent equipment appraiser who does on-site collateral verification. Lukes & Lukes sends a certified equipment appraiser to the site to count the equipment, match each data plate and serial number to the borrower's schedule, and report every exception with photographs. The work is nationwide and the report is written for the credit file.

What happens when a data plate does not match the schedule?

The unit is photographed, its plate is recorded exactly as read, and it is listed as an exception beside the schedule line it was expected to match. Common causes are a transposed digit on the schedule, a replaced component, or a different unit in its place. The report records which one the evidence shows and leaves the conclusion about intent to the lender.

Can you count bulk material or a full yard, not just serialized machines?

Yes. Rows of like units, racked stock and bulk material are counted by zone from overlapping, geotagged photographs, using computer-vision counts checked by hand against a sample. The count is reconciled to the schedule on site and the method is written into the report.

Can the verification and the appraisal be done on one site visit?

Yes, and it is the usual way. The count and plate match come first, and the appraiser values the verified units against the premise the lender needs, usually OLV or FLV. With a value, the report is a USPAP-compliant appraisal developed under STANDARD 7 and reported under STANDARD 8. Without one, it is a verification and says so.

Do I need an appraisal or a collateral verification?

A verification answers whether the collateral is there and is what the schedule says. An appraisal answers what it is worth. A lender worried about missing or substituted units needs the verification; a lender sizing a loan or a reserve needs the value. Many files need both, and one site visit covers them.

Is a collateral verification an investigation?

No. We count, identify, photograph and reconcile the equipment at a site we are authorized to enter, against the schedule the client supplies. We report what is there and what is not. Tracing where a unit went, or why, is work for the lender's counsel or a licensed investigator.

How do you get access to the borrower's site?

On a written basis: the inspection clause in the security agreement, the borrower's consent, or a court order. The lender arranges access, and the date is set with the site contact. We do not enter a site over the owner's objection.

What drives the cost of a verification?

The number of units, how many sites, how the equipment is spread across each site, whether plates are reachable, travel, and whether a value is added. A short, accurate schedule and a site contact with keys and lift access shorten the visit more than anything else.

Ready when you are

Know what is really on site.